YES
NO
INSTRUCTION GUIDE:
ZTR WHEELS
NEEDED:
Stan’s NoTubes ZTR wheel set, 2 tires,
Stan’s NoTubes Tire Sealant, core remover
tool, injector or 2 oz. bottle, floor pump or
compressor, soapy water, safety goggles.
WARNING: Always wear safely goggles,
Never inflate above 45psi. Sealant can
stain clothes or furniture. Video can be
seen here: http://go.notubes.com/mti
Mount tire: Making sure to position the tire bead
in the center channel of the rim, mount one tire
bead beginning opposite the valve and finishing at
the valve. Once the first bead is mounted begin
mounting the second bead opposite the valve and
finish at the valve.
With a brush or sponge apply a generous amount
of soapy water to both beads of the tire to help it
slip onto the bead of the rim when inflating.
Rotate the valve to 12 o’clock and install a
pump. Inflate tire to 35 psi to seat tire.
Add sealant: Once successful with inflation either
dismount part of the tire or remove the valve core
to add Stan’s sealant. Add 2 – 3 oz. of sealant.
1
Inflate to riding pressure. The chart above is a recommended
starting point.
EIS-007 Instructions: ZTR Wheels.pdf
110
16 / 1.1
20 / 1.4
30 / 2.1
35 / 2.4
40 / 2.8
PSI / BAR
25 / 1.7
120 130 140 150 160 170 180 190 200 210 220
50
LB
KG55 59 64 68 73 77 82 86 91 95 100
RECOMMENDED MTB TIRE PRESSURE
RIDER WEIGHT
PRESSURE
26''/29er x 2.0''
26''/29er x 2.0''
5
Bounce: hold the wheel vertically and dribble it to disperse the
sealant throughout the inside of the tire. Let it drop from an inch
or two, then rotate a few degrees and repeat. Do this for several
revolutions of the wheel.
6
2
3
4
Lay tire on side and apply a thin sheen of soapy water around the
sidewall and the bead area. Look for suds occurring anywhere on
the tire or bead area. Suds bubbling out from the tire indicate
porous areas. Shake the sealant to those areas to seal them and
apply soap and water again. Check for suds forming on both sides of
the tire. Repeat until no suds remain. Install the cassette and rotors
according to the component manufacturer's recommendations.
7
